Hi! Simply click below and type your query.
Our experts will reply you very soon.
These oils are recommended in pressure circulation lube oil system in steam/gas/water turbines as prime mover for electricity generation. These are also used for the lubrication of steam turbines used as prime movers in industries. They are used in the lubrication of bearings of rotary/turbo compressors. They are also used to lubricate bearings prone to water contamination where demulsibility becomes a very important
parameter for selection of oil.
Our grades meet above specifications for the
respective viscosity grades
Health and Safety
This oil is not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.
|Characteristics||IS 1448||Typical Figures|
|Appearance||--||Clear fluid||Clear fluid||Clear fluid|
|Density at 15°C||P:16||0.8512||0.8528||0.8552|
|K.V at 40° C, cSt||P:25||32.9||37.3||46.5|
|Pour Point, °C||P:10||-18||-18||-18|
|Flash Point, (COC), °C||P:69||238||240||246|
|Copper corrosion @ 100° C, for 3 hrs.||P:15||No corrosion||No corrosion||No corrosion|
|a) Sequence I||Nil / Nil||Nil / Nil||Nil / Nil|
|b) Sequence II||P:67||10 / Nil||10 / Nil||10 / Nil|
|c) Sequence III||Nil / Nil||Nil / Nil||Nil / Nil|