-
info@bpclkolkata.com -
08048774614
Norcam Oil
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler, Trader, Distributor, Importer |
| Performance Level | Proprietary Grade |
| Grade | B , C , E , G & 22 |
| Oil Type | Extreme Pressure & Neat Cutting Oils |
| Click to view more | |
Preferred Buyer From
| Location | Worldwide |
Product Details
ViewApplications
- These oils are used for machining yellow metals. Suitable for less severe classes of machining on ferrous metals and are excellent for automatic lathes, screw cutting machines etc.
- NORCAM 22 has special chlorinated EP additives and is designed as multipurpose neat cutting oil. NORCAM C is approved by DGQA meeting ZX-6 requirements.
- NORCAM E & G oils are recommended for use in wide range of machining operations on medium machinability metals and also for severe operations on certain highly machinable
Performance Benefits
- NORCAM E & G are blended with a combination of specially selected extreme pressure additive which provides excellent protection over wide range of load, speed and operating temperatures
- Being lighter in colour, these oils enable better visibility to the operator
- Oiliness additives improve the surface adherence properties
Health and Safety
These oils are not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.
Technical Specifications
| Characteristics | IS 1448 | Typical Figures | ||||
| B | C | E | G | 22 | ||
| Appearance | -- | Clear fluid | Clear fluid | Clear fluid | Clear fluid | Clear fluid |
| Density at 15°C | P:16 | 0.9096 | 0.9091 | 0.864 | 0.8781 | 0.9194 |
| K.V at 40° C, cSt | P:25 | 20.1 | 34.7 | 13.33 | 32 | 21.54 |
| Copper corrosion @ 100° C, for 3 hrs. | P:15 | 1b | 1b | 1a | 1b | 1b |
| Flash Point, (PMCC), °C | P:69 | 160 | 170 | 180 | 226 | 170 |
