Bearing Oils

These oils are recommended for all heavy duty enclosed gear drives with circulation or splash lubrication system operating under heavy or shock load conditions, plain and antifriction bearings subjected to shock and heavy loads. The grades give dependable performance for continuous service at operating temperature upto 110°C. These oils are also suitable for spray lubrication systems requiring extreme pressure properties.

Balmerol Protomac M Series Oils are general purpose machinery oils. They are suitably blended from mineral oil base stocks to provide good oiliness for general lubrication of machineries. Balmerol Protomac M Series Oils series oils contain additives to impart rust prevention and film strength characteristics. Use of these grades will help in reducing power consumption, wear and tear of machineries

Balmerol Protomac SP Series are premium quality all purpose industrial gear oils. Balmerol Protomac SP Series oils are blended from carefully selected paraffinic basestocks and combination of synergistic additives to achieve the required performance level of different standards as well as compatibility with normal seal materials.

Gulf Security series are industrial bearing and circulating oils primarily intended for lubrication of circulating systems,total loss systems, low or moderately loaded enclosed gears and air compressors where a straight mineral oil is recommended. These oils are blended from high quality, solvent refined paraffinic base oil and anti-foam agents.

Gulf Security series are industrial bearing and circulating oils primarily intended for lubrication of circulating systems,total loss systems, low or moderately loaded enclosed gears and air compressors where a straight mineral oil is recommended. These oils are blended from high quality, solvent refined paraffinic base oil and anti-foam agents.

YANTROL grades are high quality lubricating oils intended for general lubrication of industrial machinery. They are manufactured from selected base stocks and fortified with additives like antiwear and antirust. They are specially developed for steel mill general purpose lubrication

HP FILM OILS are highly refined mineral oils suitable for oil film bearings used in steel plants. The product is blended from solvent extracted high viscosity index base stocks having excellent demulsibility characteristics. They also possess good oxidation and thermal stability.

MAK Cabol oils is a range of high quality heavy duty circulating oils designed for general applications. They are formulated with high quality straight mineral base oils. The oils have low sulphur content and inherent thermal stability and resistance to oxidation. They have high film strength providing extra rust protection. MAK Cabol oils are compatible with the seal materials and paints normally specified for use with mineral oils.

MAK Cabol oils is a range of high quality heavy duty circulating oils designed for general applications. They are formulated with high quality straight mineral base oils. The oils have low sulphur content and inherent thermal stability and resistance to oxidation. They have high film strength providing extra rust protection. MAK Cabol oils are compatible with the seal materials and paints normally specified for use with mineral oils.

MAK Cane Crushing Oil NB 40 has been developed for protection of the roll bearings and open gears of cane crushing mill. They are manufactured from special high viscosity lubricating oil base stocks and selected non-toxic mild extreme pressure additive. No bituminous compound is used in the formulation making it easier to dispose after use. It can lubricate adequately under conditions of low speed, high operating pressures and shock loading.

High performance bearing oils for steel millsMAK Filmbear oils are a range of high quality heavy dutybearing oils. They have been formulated from highly refined,superior hydrotreated base oils and fortified with selectedash-less type additives. The oils have high viscosity index,very low sulphur content and inherent resistance to oxidation and thermal degradation.

MAK Steel EP 100 is a premium quality heavy duty circulating oils designed for lubricating gears and bearings.It is formulated with high quality severely hydroprocessed mineral base oils and a high performance ashless additive system designed to provide outstanding antioxidant property, exceptional equipment protection and reliability under severe operating conditions.

MAK Univol oils are a range of high quality heavy duty circulating oils designed for general applications. They are formulated with high quality severely hydroprocessed Group II plus mineral base oils. The oils have high viscosity index, very low sulphur content and inherent resistance to oxidation.