|type of Gear Oil||compressor Oil|
|Density||15 Degree Celsius|
|flash Point||220 Degree Celsius|
|Performance Level||Proprietary Grades|
These are exclusively developed to meet the requirements of heavily loaded, slow speed Mill Roll Bearings in Sugar Mills. Being non-bituminous in nature, it is easier to dispose off the used lubricant.
Health and Safety
This oil is not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.
|Characteristics||IS 1448||Typical Figures|
|Density at 15° C||P:16||0.8986|
|K.V at 40° C, cSt||P:25||39.71|
|Rust preventive test (with cane juice)||P:||Pass|
|Pour Point, °C||P:10||-6|
|Flash Point, (COC), °C||P:69||240|
|Copper Strip Corrosion Test at 100°C for 3 hrs.||P:15||1a|