-
info@bpclkolkata.com -
+91-9831384409
Hydraulic HLP Oil
Specifications
| 11 Th Fls of Fzg | Niemann Ep Test |
| is 11656 | 1986 [reaffirmed March, 2002] |
| Condiiton | Good |
| Apploication | Industrisl, Automotive |
| Form | Liquid |
| Type | Oil |
Performance Benefits
- High thermal stability and excellent
- compatibility with seals
- They provide trouble-free service and have
- found to be far superior than other anti-
- wear hydraulic oils
- Good oxidation stability
- Possesses high FZG rating
Applications
These are recommended for high pressure hydraulic systems and also for power transmission in systems operating at high speeds, loads and temperatures.These are suitable for ubrication of pumps and industrial hydraulic machinery operating under eavy loads.These are specially recommended for sophisticated high performance Electrohydraulic or Numerically Controlled systems.
Hydraulic HLP 32 is approved by –
- M/s Voith (I) Ltd., Hyderabad for use in voith variable speed and hydraulic coupling
- M/s BHELfor use in boiler feed pumps, booster pumps and drive motor bearings
Performance Level
- Denison HF-0 & HF-2
- Vickers 1-286-S
- US Steel 127
- Cincinnati Milacron P-70
- Our grades meet above specifications for the
- respective viscosity grades.
Health and Safety
These oils are not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.
Technical Specifications 01
| Characteristics | IS 1448 | Typical Figures | ||
| 22 | 32 | 46 | ||
| Appearance | -- | Clear fluid | Clear fluid | Clear fluid |
| Density at 15° C | P:16 | 0.849 | 0.8513 | 0.8561 |
| K.V at 40° C, cSt | P:25 | 22.9 | 32.6 | 46.1 |
| Viscosity Index | P:56 | 104 | 103 | 103 |
| Pour Point, °C | P:10 | -21 | -21 | -21 |
| Flash Point, (COC), °C | P:69 | 200 | 210 | 244 |
| Copper Strip Corrosion Test at 100°C for 3 hrs. | P:15 | 1a | 1a | 1a |
| Foaming Characteristics/Stability | ||||
| a) Sequence I | P:67 | Nil | Nil | Nil |
| b) Sequence II | Nil | Nil | Nil | |
| c) Sequence III | Nil | Nil | Nil | |
Technical Specifications 02
| Characteristics | IS 1448 | Typical Figures | ||
| 68 | 100 | 150 | ||
| Appearance | -- | Clear fluid | Clear fluid | Clear fluid |
| Density at 15° C | P:16 | 0.8598 | 0.8644 | 0.8705 |
| K.V at 40° C, cSt | P:25 | 68.3 | 100.5 | 150.7 |
| Viscosity Index | P:56 | 102 | 101 | 99 |
| Pour Point, °C | P:10 | -18 | -18 | -18 |
| Flash Point, (COC), °C | P:69 | 248 | 256 | 260 |
| Copper Strip Corrosion Test at 100°C for 3 hrs. | P:15 | 1a | 1a | 1a |
| Foaming Characteristics/Stability | ||||
| a) Sequence I | P:67 | Nil | Nil | Nil |
| b) Sequence II | Nil | Nil | Nil | |
| c) Sequence III | Nil | Nil | Nil | |
Mak Hydrol HLP Oil pdfExplore More Products
