|Performance Level||Proprietary Grade|
|Base Material||Base Oil|
|Dropping Point||525.0 Degree Farenheit|
|Flash Point||428 Farenheit|
This is used in the lubrication of steel mill roll necks during cold rolling/drawing operations.
Performs excellently even under shock load conditions
Health and Safety
This oil is not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.
|Characteristics||IS 1448||Typical Figures|
|Unworked penetration @ 25°C||P:60||77|
|Drop point, °C||P:52||105|
|Free Organic Acidity (as oleic acid), % by mass, max.||P:53||0.3|
|Free alkanity (as Ca(OH)2) % by mass||P:53||0.25|
|Water content, % by mass||P:40||1|
|Copper Strip Corrosion Test @ 75°C for 24 hrs.||P:51||Negative|